CW2460

The CW2460 from Chemtronics is a CircuitWorks 60 minute conductive epoxy. CircuitWorks conductive epoxy is a two part, silver epoxy used in prototype, repair and general conductive bonding applications. It features strong mechanical bonds, excellent electrical conductivity, excellent thermal conductivity and quick room temperature curing. The CW2460 features excellent adhesion, excellent cured flexibility, excellent chemical resistance and good moisture resistance. CircuitWorks conductive epoxy bonds aggressively to a wide variety of materials. It offers increased workability and extended pot life for high strength conductive bonds. Components can be easily placed and replaced before full cure occurs. For accelerated cure, simply heat material to 212°F (100°C). This conductive epoxy bonds aggressively to a wide variety of materials. Mix equal amounts (1:1) by weight or volume of part A and part B. Mix thoroughly for 2 to 3 minutes and apply within 1 to 2hour.

• Adhesive 10g (0.35oz) jar, hardener 10g (0.35oz) jar, in blister pack
• Silver content is <gt/>75%, volume resistivity is <lt/>0.001ohm-cm
• Repairs defective traces and creates jumpers on boards
• Quick solderless electronic connections and makes high strength solderless conductive connections
• High strength bond adheres dissimilar surface
• Shelf life is 12 months (store at temperatures below 120°F), typical thickness of 5mil
• Two component product with simple mixing ratios
• Part A material is adhesive (bright silver colour), part B is hardener (gray silver colour)
• 3.8 x 10^-3 Cal-cm/sec-cm² -°C, 11.0 BTU-in/hr-ft² -°F, 1.6W/m°K thermal conductivity
• Operating temperature range from -55°C to 150°C