SX1250IMLTRT
RF Transceiver, 150 to 960 MHz, FSK, 22 dBm Out, 3 to 3.6 V, QFN-EP-24
Vous en voulez davantage ?
| Type de conditionnement | Quantité | PU HT: | Total |
|---|---|---|---|
| Mise en bobine | 1 | 13,200 $ | 13,20 $ |
| Total Prix | 13,20 $ | ||
| Quantité | Prix |
|---|---|
| 1+ | 13,200 $ |
| 50+ | 10,850 $ |
| 100+ | 10,010 $ |
| 250+ | 9,040 $ |
| 500+ | 8,710 $ |
| 1000+ | 8,390 $ |
| 2500+ | 8,220 $ |
| 5000+ | 8,050 $ |
| Quantité | Prix |
|---|---|
| 3000+ | 7,480 $ |
| 9000+ | 7,320 $ |
| 15000+ | 7,180 $ |
Informations produit
Aperçu du produit
SX1250IMLTRT is a multi-band sub-GHz RF front end. It is designed to work along with Semtech’s SX1302 baseband engine, to design a high-performing LoRa® or LoRaWAN gateway. It covers any frequency band below 1GHz, making it the perfect candidate to support any license-free band used in today’s IOT use cases. The device supports up to +22dBm output power on-chip. This embedded high-power capability can be leveraged to reduce the bill of material cost when designing a gateway. As far as receiver, the Noise Figure of the system is also extremely low, eliminating the need for an external high-end and power-consuming Low Noise amplifier, if the goal is to come up with a cheaper and median-spec gateway. Application includes LoRa® and LoRaWAN gateways.
- Europe 868MHz, India 866MHz
- North America 915MHz, APAC 920MHz
- Asia 923MHz, lower UHF bands 169 and 433 or 490MHz
- Supply voltage, applies to VBAT-RF and VBAT-DIO range from 3 to 3.6V
- 20pF maximum load capacitance on digital ports
- 0dBm maximum RF input power
- 10:1 voltage standing wave ratio maximum
- 32MHz crystal oscillator frequency typical
- 100µW drive level maximum
- QFN 24 package, temperature range from -40 to 85°C
Documents techniques (2)
Législation et Questions environnementales
RoHS
RoHS
Certificat de conformité du produit