LIS3DHHTR
MEMS Accelerometer, 4 Wire, SPI, ± 2.5g, X, Y, Z, SPI, CCLGA, 16 Pins, 0.076mg/digit
| Type de conditionnement | Quantité | PU HT: | Total |
|---|---|---|---|
| Mise en bobine | 1 | 19,990 $ | 19,99 $ |
| Total Prix | 19,99 $ | ||
| Quantité | Prix |
|---|---|
| 1+ | 19,990 $ |
| 50+ | 16,150 $ |
| 100+ | 15,660 $ |
| 250+ | 15,390 $ |
| 500+ | 14,360 $ |
| 1000+ | 13,760 $ |
| 2500+ | 13,490 $ |
| 5000+ | 13,210 $ |
Informations produit
Aperçu du produit
LIS3DHHTR is LIS3DHH ultra-high-resolution and low noise three-axis linear accelerometer. It has a full scale of ±2.5g and is capable of providing the measured accelerations to the application through an SPI 4-wire digital interface. The sensing element is manufactured using a dedicated micromachining process developed by STMicroelectronics to produce inertial sensors and actuators on silicon wafers. The IC interface is manufactured using a CMOS process that allows a high level of integration to design a dedicated circuit that is trimmed to better match the characteristics of the sensing element. Application includes precision inclinometer, platform and antenna stabilization and levelling instruments.
- 45μg/√Hz ultra-low noise performance
- Excellent stability over temperature (<lt/>0.4mg/°C) and time
- 16-bit data output, SPI 4-wire digital output interface
- Embedded temperature sensor, 12bit temperature data output
- Embedded FIFO (depth 32 levels), high shock survivability
- Supply voltage range from 1.71 to 3.6V (at Vdd = 2.8V, T = 25°C)
- Supply current is 2.5mA (typ, at Vdd = 2.8V, T = 25°C)
- SPI frequency is 5MHz (4-wire interface, at Vdd = 2.8V, T = 25°C)
- Time for power supply rising range from 0.01 to 100ms (at Vdd = 2.8V, T = 25°C)
- CC LGA-16 package, temperature range from -40 to +85°C
Documents techniques (2)
Produits associés
2 produit(s) trouvé(s)
Législation et Questions environnementales
RoHS
RoHS
Certificat de conformité du produit