Imprimer la page
ST3485ECDR
Transceiver, RS422/RS485, 1 Driver, 1 Receiver, 3V to 3.6V Supply, SOIC-8
L'image a des fins d'illustration uniquement. Veuillez lire la description du produit.
FabricantSTMICROELECTRONICS
Réf. FabricantST3485ECDRCopie
Délai d’approvisionnement standard du fabricant15 semaines
Code Commande
Mise en bobine13T9577
Bandes découpées13T9577
Votre numéro de pièce
45 714 En Stock
Options de conditionnement
| Type de conditionnement | Quantité | PU HT: | Total |
|---|---|---|---|
| Bandes découpées | 1 | 2,460 $ | 2,46 $ |
| Total Prix | 2,46 $ | ||
Bandes découpées & Mise en bobine
| Quantité | Prix |
|---|---|
| 1+ | 2,460 $ |
| 10+ | 1,870 $ |
| 25+ | 1,730 $ |
| 50+ | 1,640 $ |
| 100+ | 1,560 $ |
| 250+ | 1,490 $ |
| 500+ | 1,360 $ |
| 1000+ | 1,280 $ |
Note à la ligne
Ajouté à votre confirmation de commande, à votre facture et à votre note d’expédition pour cette commande uniquement.
Informations produit
FabricantSTMICROELECTRONICS
Réf. FabricantST3485ECDRCopie
Délai d’approvisionnement standard du fabricant15 semaines
Code Commande
Mise en bobine13T9577
Bandes découpées13T9577
Fiche technique
IC TypeRS422 / RS485 Transceiver
Device TypeTransceiver
No. of Receivers1Receivers
IC Interface TypeRS422, RS485
No. of Transmitters1
No. of Drivers1Drivers
Communication ModeHalf Duplex
Data Rate Max15Mbps
Supply Voltage Min3V
Supply Voltage Max3.6V
Driver Case StyleSOIC
IC Case / PackageSOIC
No. of Pins8Pins
No. of Nodes64
ESD Protection±8 kV (Contact), ±15 kV (Air Gap), ±12 kV (HBM)
Fail Safe-
Operating Temperature Min0°C
Operating Temperature Max70°C
Product Range-
Qualification-
MSL-
IC Generic NumberST3485E
SVHCNo SVHC (25-Jun-2025)
Aperçu du produit
ST3485ECDR is a 3.3V powered, 15KV ESD protected, RS-485/ RS-422 transceiver. The transmit and receive at a guaranteed data rate of at least 12Mbps. All transmitter outputs and receiver inputs are protected to ±15KV IEC 61000-4-2 air discharge. The driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high impedance state.
- One driver and one receiver in half duplex configuration
- Operate from a single 3.3V supply - no charge pump required
- Interoperable with 5V logic
- 1µA low current shutdown mode max
- Common mode input voltage range from -7 to 12V
- Industry standard 75176 pinout
- Current limiting and thermal shutdown for driver overload protection
- Guaranteed high receiver output state for floating inputs with no signal present
- Allow up to 64 transceivers on the bus
- 8 lead SO package and temperature range from 0 to 70°C
Spécifications techniques
IC Type
RS422 / RS485 Transceiver
No. of Receivers
1Receivers
No. of Transmitters
1
Communication Mode
Half Duplex
Supply Voltage Min
3V
Driver Case Style
SOIC
No. of Pins
8Pins
ESD Protection
±8 kV (Contact), ±15 kV (Air Gap), ±12 kV (HBM)
Operating Temperature Min
0°C
Product Range
-
MSL
-
SVHC
No SVHC (25-Jun-2025)
Device Type
Transceiver
IC Interface Type
RS422, RS485
No. of Drivers
1Drivers
Data Rate Max
15Mbps
Supply Voltage Max
3.6V
IC Case / Package
SOIC
No. of Nodes
64
Fail Safe
-
Operating Temperature Max
70°C
Qualification
-
IC Generic Number
ST3485E
Documents techniques (3)
Produits de remplacement pour ST3485ECDR
2 produit(s) trouvé(s)
Législation et Questions environnementales
US ECCN:EAR99
EU ECCN:Unknown
Conforme RoHS :Oui
RoHS
Conforme à la norme RoHS Phthalates:Oui
RoHS
SVHC :No SVHC (25-Jun-2025)
Télécharger le certificat de conformité du produit
Certificat de conformité du produit