Imprimer la page
ST890BDR
Power Load Distribution Switch, Active Low, 1 Outputs, 5.5 V, 0.09 ohm, SOIC-8
L'image a des fins d'illustration uniquement. Veuillez lire la description du produit.
FabricantSTMICROELECTRONICS
Réf. FabricantST890BDRCopie
Délai d’approvisionnement standard du fabricant14 semaines
Code Commande
Mise en bobine07AH7162RL
Bandes découpées07AH7162
Votre numéro de pièce
2 281 En Stock
Options de conditionnement
| Type de conditionnement | Quantité | PU HT: | Total |
|---|---|---|---|
| Bandes découpées | 1 | 3,520 $ | 3,52 $ |
| Total Prix | 3,52 $ | ||
Bandes découpées & Mise en bobine
| Quantité | Prix |
|---|---|
| 1+ | 3,520 $ |
| 50+ | 2,460 $ |
| 100+ | 2,220 $ |
| 250+ | 2,120 $ |
| 500+ | 2,000 $ |
| 1000+ | 1,750 $ |
| 2500+ | 1,510 $ |
| 5000+ | 1,420 $ |
Note à la ligne
Ajouté à votre confirmation de commande, à votre facture et à votre note d’expédition pour cette commande uniquement.
Informations produit
FabricantSTMICROELECTRONICS
Réf. FabricantST890BDRCopie
Délai d’approvisionnement standard du fabricant14 semaines
Code Commande
Mise en bobine07AH7162RL
Bandes découpées07AH7162
Fiche technique
Power Load Switch TypeHigh Side
No. of Channels1Channels
Input Voltage5.5V
Current Limit1.2A
On State Resistance0.09ohm
IC Case / PackageSOIC
No. of Pins8Pins
Thermal ProtectionYes
On / Enable Input PolarityActive Low
No. of Outputs1Outputs
Operating Temperature Min-40°C
Operating Temperature Max85°C
Qualification-
Product Range-
SVHCNo SVHC (25-Jun-2025)
Automotive Qualification Standard-
Distribution Switch Case StyleSOIC
Aperçu du produit
ST890BDR is a 1.2A current limited high-side power switch with thermal shutdown. The ST890 device is a low-voltage, P-channel MOSFET power switch intended for high-side load switching applications. The internal current limiting circuitry protects the input supply against overload. The thermal overload protection limits power dissipation and junction temperatures. The maximum current limit is 1.2A. The current limit through the switch is programmed with a resistor from SET to ground. Typical applications are PCMCIA slots, access bus slots, portable equipment.
- 2.7 to 5.5V input range
- Low quiescent current, thermal shutdown
- Active-low FAULT indicator output
- 90mohm (typical) ON resistance (VI = 3V)
- Operating free-air temperature range from -40 to 85°C
- ON quiescent supply current is 13µA (VI = 5V, ON = GND, IO = 0)
- OFF quiescent supply current is 1µA (ON = IN, VI = VOUT = 5.5V)
- ISET bias current is 0.5µA (VSET = 1.24V, IO = 0, VI = VO)
- Undervoltage lockout hysteresis is 100mV
- SO8 package, -40 to 85°C temperature range
Spécifications techniques
Power Load Switch Type
High Side
Input Voltage
5.5V
On State Resistance
0.09ohm
No. of Pins
8Pins
On / Enable Input Polarity
Active Low
Operating Temperature Min
-40°C
Qualification
-
MSL
MSL 3 - 168 hours
Automotive Qualification Standard
-
No. of Channels
1Channels
Current Limit
1.2A
IC Case / Package
SOIC
Thermal Protection
Yes
No. of Outputs
1Outputs
Operating Temperature Max
85°C
Product Range
-
SVHC
No SVHC (25-Jun-2025)
Distribution Switch Case Style
SOIC
Documents techniques (2)
Législation et Questions environnementales
US ECCN:EAR99
EU ECCN:Unknown
Conforme RoHS :Oui
RoHS
Conforme à la norme RoHS Phthalates:Oui
RoHS
SVHC :No SVHC (25-Jun-2025)
Télécharger le certificat de conformité du produit
Certificat de conformité du produit