You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
770005
Charged Plate Analyzer, 0V - 1.1 KV Range, 0.1% Accuracy, 83 mm x 318 mm x 280 mm, No Cord
- Manufacturer:
- SCS SCS
- Manufacturer Part No:
- 770005
- Newark Part No.:
- 78Y8847
- Technical Datasheet:
- 770005 Datasheet
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- 0V to 1.1KV
- :
- 0.1%
- :
- -
- :
- 83mm
- :
- 318mm
- :
- 280mm
- :
- -
Technical Documents (1)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Product Overview
The 770005 from SCS is a charged plate analyzer. This 6" x 6" charged plate analyzer is used to evaluate the performance and functionality of ionizers. It provides assurance that ESD process needs are met in manufacturing and that there is compliance to requirements of ANSI/ESD S20.20 and EN 61340-5-1 testing per ANSI/ESD STM 3.1. It tests efficiency of an ionizer’s ion production by measuring the amount of time needed to neutralize a positive or negative charge on the isolated conductive plate. Measures are made directly at the plate for greater stability and accuracy than charged plate monitors that use field meter technology. The device is designed to provide quantitative and accurate measurements for a variety of air ionization tests in any location. It employs a revolutionary new charged-plate monitor design that utilizes an ultra-high impedance high voltage follower to monitor ion collecting plate voltage. It features 3.5digit red LED display, 0 to ±1100V range, 1V resolution.
- Customizable measurement capacitance, voltage follower technology
- Programmable discharge time mode thresholds (1 to 1000V in 1V Increments)
- Tests the offset voltage (balance) between positive and negative air ions output by an ionizer
- Power on/off, test/reset control voltage monitor output, 12 to 14V output voltage, 1A output current
- CE marked, installation category I (overvoltage category), NIST calibrated
- Decay time digital panel meter, 4 digit red LED display range from 0 to 9999sec
- Monitored voltage range from 0 to ±1100VDC or peak AC, operating temperature range from 5°C to 35°C
- DC to 1KHz small signal bandwidth (-3dB) (measured at 20V p-p)
- DC to 10Hz large signal bandwidth (measured at 2000V p-p)
- Instrument dimensions is 83mm x 318mm x 280mm (H x W x D) and weight is 2Kg
Applications
Test & Measurement
Contents
770005 charged plate analyzer, AC adapter.
Footnotes
To avoid electric shock or fire hazard, do not operate this instrument with the covers removed and the instrument is intended for indoor use only.
Warnings
To avoid electric shock, do not touch the charged plate while the instrument is on.
0 In stock
Non-Cancelable / Non Returnable
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
$9,766.58
Pricing is unavailable. Please contact customer services.
- Price for:
- Each
Multiple: 1 Minimum: 1
Filter Tool