770005

The 770005 from SCS is a charged plate analyzer. This 6" x 6" charged plate analyzer is used to evaluate the performance and functionality of ionizers. It provides assurance that ESD process needs are met in manufacturing and that there is compliance to requirements of ANSI/ESD S20.20 and EN 61340-5-1 testing per ANSI/ESD STM 3.1. It tests efficiency of an ionizer’s ion production by measuring the amount of time needed to neutralize a positive or negative charge on the isolated conductive plate. Measures are made directly at the plate for greater stability and accuracy than charged plate monitors that use field meter technology. The device is designed to provide quantitative and accurate measurements for a variety of air ionization tests in any location. It employs a revolutionary new charged-plate monitor design that utilizes an ultra-high impedance high voltage follower to monitor ion collecting plate voltage. It features 3.5digit red LED display, 0 to ±1100V range, 1V resolution.

• Customizable measurement capacitance, voltage follower technology
• Programmable discharge time mode thresholds (1 to 1000V in 1V Increments)
• Tests the offset voltage (balance) between positive and negative air ions output by an ionizer
• Power on/off, test/reset control voltage monitor output, 12 to 14V output voltage, 1A output current
• CE marked, installation category I (overvoltage category), NIST calibrated
• Decay time digital panel meter, 4 digit red LED display range from 0 to 9999sec
• Monitored voltage range from 0 to ±1100VDC or peak AC, operating temperature range from 5°C to 35°C
• DC to 1KHz small signal bandwidth (-3dB) (measured at 20V p-p)
• DC to 10Hz large signal bandwidth (measured at 2000V p-p)
• Instrument dimensions is 83mm x 318mm x 280mm (H x W x D) and weight is 2Kg

Applications

Test & Measurement

Contenu

770005 charged plate analyzer, AC adapter.

Avertissements

To avoid electric shock, do not touch the charged plate while the instrument is on.

Remarques

To avoid electric shock or fire hazard, do not operate this instrument with the covers removed and the instrument is intended for indoor use only.