TGMPL70100A1H

TGMPL70100A1H TGMPL series cube relay single shot timer is a unique combination of digital CMOS timing circuitry with a relay output in a compact 2” x 2” configuration. This unit provides the same functional performance as plug-in relay timers but at significant cost savings. The input voltage is applied continuously - when the control switch closes the relay transfers, if switch closures happen within a set time period, the relay stays closed. If the control switch stays closed or open longer than the set time, the relay opens.

• High current-carrying capacity up to 10amps, transient protected
• 100% Load isolation, no leakage in N.O. position, no heat sinking required, digital CMOS timing
• No minimum load required, totally encapsulated for protection from harsh environments
• 100% operational testing, delay on break mode if operation
• 12VDC input voltage, 1 to 100sec. example for time range
• Screwdriver adj, variable, integral time adjustment method
• SPDT relay output form
• Pulse detector timing mode, digital CMOS type, 0.2second to 24hours time range
• Repeatability is ±0.5%, 25milliseconds reset/recycle time, 6milliseconds or less initiate time
• Operating temperature range from -25°C to +65°C