Q406-A002

The Q406-A002 is a 1-channel In 2-channel out DIN rail mount AC powered DC input Multi-channel Isolator with 1800V isolation between input, output and power. The field configurable input and output feature offers flexible, wide ranging capability for DC current and voltage signals. This unipolar input isolator available as a single channel signal conditioner or as a multi-channel signal conditioner. The direct operating Q406 can be field configured for virtually any DC input to DC output within the limits specified. Calibration utilizes "TouchCAL" technology where the user simply configures the input for the current or voltage range via switches and then follows the Calibration Flow Chart. The output is set by adjusting the input until the desired output is present and then pressing the CAL button to store the output level. The Q406 can be configured for input ranges from 10mV to 100V or 1mA to 100mA, with <gt/>90% input offset or will adjust down to <lt/>10% full scale input span.

• Field configurable input ranges
• Field configurable output ranges
• TouchCAL™ technology
• 1800VAC Isolation
• UL recognized per standard UL508 (file no. E99775)
• CE compliance per EMC directive 89/336/EEC and low voltage 73/23/EEC
• SnapLoc™ plug-in terminals

Applications

Signal Processing

Avertissements

Do not change switch settings with power applied.