RP40-2415SFR/P

The RP40-2415SFR/P from Recom Power is a 40W, 2“ x 1“ regulated single output DC to DC converter. This DC to DC converter is especially designed for railway applications. It has wide 4:1 input voltage range, six sided continuous shield, 30mAp-p input reflected ripple current, 60ms (power-up) and 60ms (remote ON/OFF) start-up time. Internal operating frequency is 250KHz and output voltage accuracy is ±1%. It is certified by UL60950-1 AM2, CE, cRJus E196683, CSA C22.2 number 60950-1-07 and EN50155 standards. The device also features continuous, automatic recovery short circuit protection (SCP), overvoltage protection, overload protection and overtemperature protection. The converter has minimum isolation resistance of 1Gohm at 500VDC, maximum isolation capacitance of 1500pF, line voltage regulation of ±0.2% (low line to high line at full load) and transient response recovery time of 250μs. It is made of copper alloy (CuZn33) case, FR4 PCB base and silicone (UL94V-0) potting.

• Isolation voltage of 1.6KVDC
• Input voltage range from 9VDC to 36VDC and input current of 1811mA
• Output voltage of 15VDC and output current of 2666mA
• Efficiency of 92% and maximum capacitive load of 2600μF
• Positive logic CTRL pin and trim pin fitted
• Ripple and noise of 100mVp-p
• Load voltage regulation of ±0.5% (0% to 100% load)
• Packaging dimension of 50.8mm x 25.4mm x 10.2mm (L x W x H) and packaging weight of 32g
• Operating temperature of -40°C to 60°C (w/o derating & heat-sink) & -40°C to 105°C (with derating)

Applications

Industrial, Power Management

Notes

This power module is not internally fused. An input line fuse must always be used.